Drilling and milling machine OPTImill MB 4
Universal precision drilling and milling machines with two-stage drive motor with manual gearbox
- Heavy, solid
- cast
- designQuality industrial electric motorHighly
- smooth running thanks to ground gear wheels running in an oil
- bathRight/left
- rotationMassive
- and generously dimensioned cross table, with T-slots and adjustable gibsDrilling
- depth
- stopManual
- spindle sleeve feed with fine
- feedAdjustable and readjustable feed spindle playOperator-friendly
- control panel with emergency stop switchColumn
- with hand-scraped dovetail guideHeight-adjustable
- , large protective screen with microswitch
- Wide speed range from 95 - 3200 min¯¹ with two stages, electronically controlled
المستندات
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
المواصفات
| Info | |
|---|---|
| الماركة | OPTIMUM |
| Dimensions and weights | |
|---|---|
| الوزن | 320 Kg |
| الطول | 1155 mm |
| Width/depth (product) approx. | 775 mm |
| Height (product) approx. | 1320 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Standars & Certification | |
|---|---|
| Standard | DIN EN 55011 |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 63 mm |
| Max. size shaft milling cutter | 28mm |
| Drilling performance steel (S235JR) | 32 mm |
| Continuous drilling performance steel (S235JR) | 28 mm |
| Milling table horizontal | |
|---|---|
| Horizontal milling table length | 800 mm |
| Horizontal milling table width | 240mm |
| Max. clearance vertical spindle - horizontal milling table | 460 mm |
| Horizontal milling table T-groove size | 14mm |
| Horizontal milling table T-groove number | 3 |
| Travel | |
|---|---|
| Travel X axis manual | 450 mm |
| Travel Y axis manual | 195mm |
| Travel Z axis manual | 430 mm |
| Vertical spindle | |
|---|---|
| Vertical spindle reach | 275 mm |
| Vertical spindle spindle chuck | MT 4 |
| Vertical spindle speed range | 95 – 3200min¯¹ |
| Vertical spindle swivel range milling cutter head Z - X plane | ± 45° |
| Vertical spindle tightening bar | M 16 |
| Vertical spindle quill diameter | 75 mm |
| Vertical spindle quill stroke | 120 mm |
Service & Support
Training
Our training modules are designed to optimize your use of our solutions and are available for our full range of machines, software and accessories.
Technical Support
We bring you local support in your language where we have established presence directly and with our partners.
Maintenance
Thanks to experience gathered with our partners and our suppliers, we can offer you a wide range of services.