Hydraulic Hose, 6,4 mm Internal Diameter (3/8"-NPT - AZ3120)
- 4:1 Safety Factor.
- 700 bar working pressure.
- Wide range of standard hydraulic hoses up to 10 metres. Hoses can be supplied in any length on request.
- Rubber Guard on both ends.
- 3/8 inch;-NPT thread on each end. Can be supplied with couplers on one or both ends.
- Internal Diameter 6,4 mm; Oil Capacity: 35 cm3 per metre.
- Minimum Bending radius: 115 mm.
- WARNING: Never disconnect the hose when the system is pressurized. Never exceed the maximum working pressure of the hose.
- NOTE: Apply 2 rounds of Teflon around all 3/8 inch; NPT threads of the system, in the thread direction, leaving the first thread uncovered to prevent the tape breaking and entering the hydraulic system. Torque: 80 Nm.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Info | |
|---|---|
| Brand | Larzep |
| Origin | ES |
| Technical Specs | |
|---|---|
| Internal Diameter (mm) | 6.4 |
| End One Assembly | 3/8"-NPT |
| End Two Assembly | AZ3120 |
| Dimensions and weights | |
|---|---|
| Weight | 2.8 kg |
| Others | |
|---|---|
| Hydraulic hose | 0.8 m, 1.5 m, 2 m, 3 m, 4 m, 6 m, 10 m |
Service & Support
Training
Our training modules are designed to optimize your use of our solutions and are available for our full range of machines, software and accessories.
Technical Support
We bring you local support in your language where we have established presence directly and with our partners.
Maintenance
Thanks to experience gathered with our partners and our suppliers, we can offer you a wide range of services.