TST 10 - SERIES 2 (0.5-10 N.M)
The TST combines simplicity with up to date technology to provide a high
quality instrument for the testing and calibration of low capacity torque tools.
Featuring an internal transducer complete with Rundown Fixture
TECHNICAL SPECIFICATIONS
Rundown Fixture: 50540
FEATURES
- Pictorial display panel for easy mode selection.
- Limit Detection with low, pass and fail indication. Up to 8 target values can be set.
- Pulse count feature in Impulse mode and Clutch Tool mode.
- "SMART" intelligence for transducer recognition.
- Memory for calibration details of 20 non- "SMART" mV/V calibrated transducers.
- User selectable frequency response for each mode of operation.All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors. Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts). RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
- Analogue output allows the instrument to be used as part of a process control system for example, shutting off a power tool at the desired torque.
- Guaranteed classification to BS7882:2017, Class 1 or better over the primary calibration range (20% to 100% of full scale), Class 2 or better over the secondary calibration range (lowest calibrated value to 20% of full scale). Class 1 equates to ±0.5% of reading
المستندات
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
المواصفات
| الماركة | نوربار |
| Origin | GB |
Service & Support
Training
Our training modules are designed to optimize your use of our solutions and are available for our full range of machines, software and accessories.
Technical Support
We bring you local support in your language where we have established presence directly and with our partners.
Maintenance
Thanks to experience gathered with our partners and our suppliers, we can offer you a wide range of services.