WM-200 AngleMaster

Brand
- TORMEK

399.000 EGP 449.000 EGP 449.0 EGP

399.000 EGP

هذه التركيبة غير موجودة.

The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.

Brand: TORMEK

طرق دفع متعددة
شحن لجميع المحفظات
خدمة ما بعد البيع

الشروط والأحكام
الشحن: خلال ٢-٣ ايام عمل

The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.

The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.

TIP The AngleMaster has two magnets so you can store it onto the side of the machine, and always have it close at hands when you need it. Applies to all Tormek models except 1200 and T-3. On Tormek T-4 you can attach it onto the machine plate which is made of metal.

Instruction WM-200 EN
Parts breakdown WM-200 EN

Tools & Equipment

المكينات

النقش الميكانيكي والليزر

WM-200 AngleMaster

399.000 EGP 449.000 EGP 449.0 EGP

399.000 EGP

Share

TIP The AngleMaster has two magnets so you can store it onto the side of the machine, and always have it close at hands when you need it. Applies to all Tormek models except 1200 and T-3. On Tormek T-4 you can attach it onto the machine plate which is made of metal.

Instruction WM-200 EN

Parts breakdown WM-200 EN

المنتجات التي تم عرضها