The Tormek Long Knife Jig SVM-140 has been developed especially for the sharpening of long and flexible knives, like filleting knives.
This jig works in the same way as the Knife Jig SVM-45 but is wider. Its larger width, 140 mm, stabilizes a long and thin blade and gives more support. Of course it can also be used for larger knives with a more stable knife blade like chef's knives.
The jig rests on the Universal Support. The exact edge angle is set by rotating the adjustable stop or with the Micro Adjust on the Universal Support.
The Universal Support is placed vertically for grinding towards the edge.
SVM-140 Design The jig comprises an adjustable clamp (1) for holding knives of any thickness and an adjustable stop (2). You adjust the jig to the knife thickness with the screw (3). You lock the tool by tightening the knob (4).
Instruction SVM-140 EN
Parts breakdown SVM-140 EN
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.